2700 / 480 Two Color Carton Printing Slotter With Die Cutting
Machine
Introduction of the whole machine:
Multi-functional equipment integrating monochrome printing, this
machine adopts water-based screen printing, which has the
characteristics of reliable quality, clear printing, accurate color
registration, neat side cutting, energy saving and labor saving,
etc. It is the equipment for producing middle and high cartons.
Uses and characteristics:
1. The paper feeding table adopts combined chain type manual paper
feeding.
2. 360 planetary electric phase adjustment is adopted, which can be
adjusted when running and stopping, and the adjustment is quick and
accurate, with microcomputer phase meter.
3. When the machine is stopped, the inking roller can automatically
separate from the surface of the printing plate, so as not to
damage the printing plate.
4. The inking roller has an automatic idling device, so that the
ink will not dry up when the machine is suspended.
5. Pneumatic locking and electric separation are adopted.
6. Pneumatic diaphragm pump supplies ink, and automatically
homogenizes ink.
7. All the main transmission gears are made of 50crmo ball-milled
steel with helical teeth, which are finished and shaved.
8. The transmission part adopts self-spraying lubrication, which
improves the service life and precision of the machine
Rack section:
1. The wallboard is made of 50mm thick solid, which makes the
machine run smoothly.
2. ***200 I-shaped channel steel is used for the drawbar. Make the
machine run smoothly.
3. Cast iron is used for the ground rail, which makes walking more
stable.
Walking part:
1. The traveling wheel adopts 6206 double bearings, which can bear
greater pressure.
2. The walking shaft adopts cold-drawn steel with diameter of 35,
which makes the machine walk more stably.
3. If the machine is locked, the electrical parts can control the
traveling motor to fail to start, so as not to damage the motor.
Locking part:
1. CF18 bearing is adopted in the locking part, so that the locking
is free of wear.
2. It is equipped with a locking shaft part, which can
automatically control the locking shaft without single control and
improve efficiency
