WJ100-1800-Ⅱ type five layer corrugated roller cardboard production
line
Device configuration and technical instruction
Has passed the ISO: 9001-2000 Quality Management System
Certification
Innovative Packaging Technology,Class brand
Name of machine:five layer corrugated paperboard production line
| specification | Equipment name | UNIT | QTY | Remark |
| ZJ-V5B | Hydraulic shaftless mill roll stand | a | 5 | |
| Paper trolley | a | 10 |
| RG-1-600 | Top paper preheater | a | 2 |
roller D 600mm,including pressure container certificate.Electric
adjustment wrap angle.Wrap angle can adjust the paper preheat area
in the range of 360°.
|
| RG-1-600 | Core paper preheater | a | 2 |
| RG-3-600 | Triple preheater | a | 1 |
| SF-280S | Corrugated single facer | a | 2 | Corrugated main roller D 280mm,material with 48CrMo alloy
steel,independent gearbox,universal joint transmission structure. |
| GM-18 | Double glue machine | a | 1 | Glue roller diameter 269mm.Each independent frequency motor drive,
manual adjustment glue gap. |
| DF | Conveyor bridge | set | 1 | 200mm main beam channels, independent inverter motor drive pull
paper feed, adsorption tension.Electric correction. |
| SM-10 | Double facer | set | 1 | Dryer section 600MM*12pieces hot plate,pneumatic lift roller, using
intensive pressure roller. |
| ZQS | Thin knife slitting | set | 1 | Electric thin blade,electric detuning,five knives eight lines,
blade with tungsten alloy steel making. |
| NC-120 | NC cutter helical knives | a | 1 | Full AC servo control, energy storage brake, helical blade
structure, oil-immersed gears,10.4-inch touch screen display. |
| DMT-120 | Paper sheet delivery and side conveyor | a | 1 | Electric adjustment cardboard size, pneumatic control transverse
output paperboard. |
| ZJZ | Glue station system | set | 1 | Customer-owned pipeline.glue device respectively carrier pot,main
pot,storage pot,and send glue pump,back glue pump. |
| QU | Gas source system | a | 1 | Including 0.6m³gas tank 1 unit.Air pump,pipeline is prepared by the
customers. |
| ZQ | Steam system | set | 1 | Including within equipment pipelines valve,traps,meter and steam
elements,customer-supplied heat and piping. |
| DQ | Electrical control cabinet system | set | 1 | Electronic control system:fingerless single facer,driving part,NC
thin blade slitter scorer,double facer,glue machine all adopt
frequency motor,delta frequency control system |
main technical parameters and requirements in production line
type:WJ100-1800-Ⅱ type five layer corrugated paperboard production
line:
1,The maximum production width of the corrugated cardboard:1800mm
2,Design speed:100m/min
3,Economic speed:60-80m/min
note:Production line speed test paper should meet the following
requirements:(the surface temperature of the equipment is not less
than 172℃)
Paper rating of not less than B grade Paper moisture content of
about:11%±2%
top paper:100—250g/m2 core paper:100--250g/m2
corrugated paper:100—200g/m2
4,Flute-type combination:A ,C, B, E(as customers’ requirement)
5,Steam the necessary requirements:
amount of steam 2500—3000Kg/Hr the highest pressure:1.2Mpa
common pressure:0.8-1.1Mpa
6,power supply:380V 50Hz Three-phase four-wire system
7,equipment installed total power:about150KW The actual power
consumption:about 80KW(full speed)
8,equipment covers:about60m×10m×5m(Specific length of foundation
Figure prevail)
9,Equipment out of paper orientation:According to the user to
determine the transmission plant set left or right position
10,Equipment applicability,Available in A, B, C class domestic or
imported paper Paper
Suzy yu (Sales Dept.)
Cangzhou Aodong Light Industry Machinery EQUIPMENT Co.,Ltd
Cangzhou City, Hebei Province China
Mob:+86-15903176289
E-mail:suzy@aodongpack.com
QQ:174996398
Wechat:15903176289
