Automatic Double Piece Box Stitching Machine
Double-sheet box nailing machine is one of the box nailing
machines, which is mainly aimed at the color printing factory or
carton factory. When receiving the order of large-sized boxes (or
customer's demand), the size of the boxes can not be met by the
printing press/offset press, and separate printing is adopted to
complete the operation.
Chinese name
Double-sheet nail box machine
basic content
What is a two-piece nail box machine
Double-sheet box nailing machine is one of the box nailing
machines, which is mainly aimed at the color printing factory or
carton factory. When receiving the order of large-sized boxes (or
customer's demand), the size of the boxes can not be met by the
printing press/offset press, and separate printing is adopted to
complete the operation.
Characteristics of double-piece nail box machine
This machine can order cartons with sheet forming, double-sheet
forming and irregular cartons, cartons with bottom and no lid, and
is suitable for ordering large cartons. The machine adopts full
electric control, and the nail box is fast and labor-saving. The
paper feeding part of the machine adopts automatic counting, and
the finished products are sent out and bundled. When the carton
specifications are switched, it takes only two or three minutes to
complete the adjustment, which is convenient and quick to operate.
The machine can also order nails, double nails and reinforcing
nails at the same time, which has strong flexibility. The machine
uses the computer to set and automatically adjust the nail spacing,
and the computer screen can also display the fault prompt, which is
beneficial to quickly eliminate the fault, which is unmatched by
the performance of the ordinary nail box machine.
Analysis of Common Faults of Nail Box Machine
In the nail box, it can be found that when the flat wire quality is
not good, the wire feeding resistance is large, the spring of the
wire feeding wheel is too loose or too tight, the fixing screw of
the wire feeding wheel is loosened, the guide rail is offset, the
gear is skewed, the position of the bottom die and the punch is not
correct, and the bottom die is obviously worn. To solve this
problem, the solution is to use high-quality flat wire with good
rigidity and smooth surface coating; Check whether each part of the
wire feeding is blocked due to improper adjustment; It is advisable
to adjust the relevant parts of the machine so that the wire
feeding movement can be kept relaxed and free; Take corresponding
measures to repair or replace the worn bottom die.
Main fault phenomena in the staple position
When there is a staple in the staple, it is easy to affect the
normal action of the clutch. The side cover of the staple can be
disassembled, and the punch can be taken out for cleaning and
reloading after adding lubricating oil; In case of inaccurate head
positioning, check whether F3 fuse 34-35 (AC), F9 fuse 50-51 (DC)
and brake coil resistance wire (15ω) are normal. If the
photoelectric sensing switch of the upper staple baffle does not
act, and the axis of the lower guide rail cannot be sensed, which
causes the paper to be stapled without feeding, the sensing
distance of the photoelectric switch can be adjusted; If the nail
head has continuous nailing action, check whether the electrical
appliance is damaged.
The baffle did not open after the cardboard was fed in
If the photoelectric sensing of the baffle is abnormal, this fault
is easy to occur. The photoelectric sensing device can be adjusted
to keep the sensing distance moderate, so as to ensure that the
baffle can move normally after the cardboard is fed in.
The left and right cardboard feed belts run continuously after
nailing
When the photoelectric induction intensity of the right baffle is
too strong, the above faults are easy to occur. In this regard, the
linear knob on the side of the electric eye can be adjusted.
Clockwise adjustment can increase the induction intensity, while
counterclockwise adjustment can weaken the induction intensity, and
adjust it to normal induction, so that no abnormal situation occurs
after nailing.
