MAIN SPECIFICATION
High Speed Packing Box Corrugated Carton Cardboard Production Line
1.Manufacture width: 1800mm
2.Design speed: 150m/min Working speed: 100-120m/min
Note: The roll paper which is used to test the production speed
should meet following requirements:
Grade: Min. B Moisture content: 11% ±2%
Face paper: 100~250g/m2 Liner paper: 100~150g/m2
Corrugated paper: 100- 200g/m2
3.Flute profiles: A,B,C ,E fluteas (per clients request)
1.this part is connected with 20#channel iron , 16#beam,63#angle
steel total length is 10 meter
2.attached paper hanger , and Synchronously running with the
corrugated machine
3.attached with security Barricade for 1 set(1 inch tube) , ladder
for 1 set(made of 1 inch welded tube,width for 600mm)
4.Electric correction, it will be glutted when it gets adsorption
5.That Spreading 12 PCT on conveyor bridge plate, thickness of 10MM
6.Double preheating and gluing the bridge sidewalks , make it
connected
1,Symmetrical structure, which can be installed at the same time two
bundle of paper tube; The use of electric drive to complete base
paper clamping, lifting, loosen, moving in and around translational
action.
2,working width:1600mm.
3,Maximum reel paper: 1400x1600mm.
4,Minimum reel paper::400x800mm.
Maximum bearing of single side:2000kg.
6,Penumatic brake set
7 .ectrical components are centralized control, button action.
8, travel switch control range.
9, friction slices pre-tightening force control lifting weight.
10.One main motor, power 2.2 kw, each arm power 1.5 kw×4
Corrugated cardboard production line is the professional equipment
for producing corrugated cardboard .
The production line consists of the Mill Roll Stand, liner (medium
paper ) Pre-heater, Single facer machine ,
Conveyor bridge , Gluing Machine, Double facer machine , Slitter
Scorer , Cut-off , Conveyer and Stacker,
Heating System ,Air compression system and Glue Making System and
so on. We produced different grade
3,5,7 ply corrugated production line with different fitting. On the
base of understanding the requirements of
the customers and the advanced skills at home and abroad, our
company has developed and designed these
production lines with the speed 60~220m/min, the paper with
1600~2200mm and A,B,C,E UV flute production
line can satisfy different customers.
Corrugated cardboard production line is the professional equipment
for producing corrugated cardboard .The production line consists of
the Mill Roll Stand, liner(medium paper ) Pre-heater, Single facer
machine ,Conveyor bridge , Gluing Machine, Double facer machine ,
Slitter Scorer , Cut-off , Conveyer and Stacker, Heating System
,Air compression system and Glue Making System and so on. We
produced different grade 3,5,7 ply corrugated production line with
different fitting. On the base of understanding the requirements of
the customers and the advanced skills at home and abroad, our
company has developed and designed these production lines with the
speed 60~220m/min, the paper with 1600~2200mm and A,B,C,E UV flute
production line can satisfy different customers.
1.It adopts cover-type structure, with high pressure blower and
suction silencer device.Air supply and the electrical cabinet
focused on the same operation from hosts not less than 1.5 m.
2.Frame and panel wall with cast iron structure, wall thickness of
130mm.Main drive with built-in oil filled gearbox transmission.
3. Corrugated roller made of 48CrMo alloy steel, quenched and
tempered, medium-frequency quenching, surface grinding, Corrugating
roller diameter DIA 268mm of surface hardness HRC58 or more
(service life not less than Locke millions running metres,
corrugated roller finished wall thickness of about 55mm, repairs
twice) critical parts such as rollers, pressure rollers wafangdian
bearing high temperature bearings.
4.Pressure roller DIA 270mm, surface grinding and chrome-plating
process, the cylinder control pressure, material for carbon steel,
45th, quenching and tempering (with device).(Finished wall
thickness of about 55mm)
5.Gluing wall plate armed structure, pneumatic controls, glue
roller 25 line pits dot the surface processing ,after the hard
chromium plating process, squeegee roller surface hard chromium
plating grinding.
6.Corrugating roller, pressure roller and raw materials provided by
the Zhongyuan special steel, corrugated rolls for 0.10 , high
pressure roller for 0.075.being with the positioning device
7.Clamping cylinder adopts 160mm
8.pre-heating roller adopts two bars of seamless steel pipe named
as 240mm and 270mm, which is originated from Tian Gang .
4.Steam requirement:
Steam consumption:2500-3000kg/hr Max. Pressure:1.2Mpa
Air compressor pressure:0.8~1.1Mpa
5. Electricity: 380V, 50Hz,three-phase four wire type(also can do
as per clients country electricity standard)
6. Equipment Occupation:the real data is according to the drawing
7. Equipment Direction:Left or Right transmission will be according
to client's requirements.
8. Factory request size:specific length as to the foundation of
drawing
Our Company is the professional manufacture for the carton box
machinery , now we already export more than 40 counties , like :
USA ,Mexico ,Poladn, Spain, Russia ,South korea ,Malaysia
,India,egypt ,Kenya and so on . we always stick to the "good
quiality , high credibility " business purpose , adhering to the "
pioneering spirit , realistic and innovative ,strick management,
keep improving " the enterprise spirit ,establish a "people -
oriented " managenment philos ophy and the " customer first "
business strategy . Our company produces complete product
specification ,elegant appearance, complete machine type, to meet
the needs of different customers.Our product has a reputation for
timely delivery, good service to win the user's high praise.ln the
future, we will take the market-oriented, science and technology
development as main power , sincerely to cooperate with the users,
constantly to updated products, continuously improve product
quality, perfect after-sales service, sincerely return society.
Welcome to contact us Thanks ! email: sale01@aodongpack.com
